Rare Metal Materials and Engineering 2014 Issue 8 Modeling and Experiments on Electromagnetic Separation of Inclusions from Aluminum Melt under Combined Magnetic Field

Modeling and Experiments on Electromagnetic Separation of Inclusions from Aluminum Melt under Combined Magnetic Field
Qiu Leyuan;Li Qiulin;Liu Wei;Graduate School at Shenzhen;Tsinghua University;Tsinghua University;

..............page:1793-1797

Preparation and Thermal Expansion Property of ZrWMoO₈ / Cu Composite
Xu Guifang;Liang Guoshan;Yang Juan;Liu Qinqin;Yan Xuehua;Cheng Xiaonong;Jiangsu University;

..............page:1798-1802

Tension-Compression Asymmetry in Mechanical Behavior and Crystal Defect of Thin Ni/Ni₃Al（001） Nanowires
Yu Jingui;Zhang Qiaoxin;Wuhan University of Technology;

..............page:1803-1808

Effect of Nd and Yb on the Microstructure and Mechanical Properties of Mg-Zn-Zr Alloy
Xu Chunxiang;Wang Xing;Zhang Jinshan;Zhang Zhaoguang;Taiyuan University of Technology;

..............page:1809-1814

Microstructure and Mechanical Properties of Superlight Mg-Li-Al-Zn Wrought Alloy
Xu Tiancai;Peng Xiaodong;Jiang Junwei;Wei Guobing;Zhang Bao;Chongqing University;National Engineering Research Center for Magnesium Alloys;

..............page:1815-1820

Effects of Reinforced Particles on Dynamic Recrystalliza- tion of Mg Base Alloys during Hot Extrusion
Chang Hai;Wang Xiaojun;Hu Xiaoshi;Wang Yanqiu;Nie Kaibo;Wu Kun;National Center for Materials Service Safety;University of Science and Technology Beijing;Harbin Institute of Technology;Harbin Engineering University;

..............page:1821-1825

Influence of Cr-Substitution on the Electrochemical Performance of LiNi_0.5Mn_0.5O₂ Cathode Material for Lithium Ion Batteries
Ma Zhen;Ye Naiqing;Wu Baoming;Xu Dong;Key Laboratory of New Processing Technology for Nonferrous Metals and Materials;Ministry of Education;Guilin University of Technology;

..............page:1826-1829

Effect of Heat Treatment on Microstructure and Mechanical Properties of GH4169 Superalloy
Du Jinhui;Lü Xudong;Deng Qun;Central Iron and Steel Research Institute;

..............page:1830-1834

Effects of Nb Addition on Glass-Forming Ability,Thermal Stability and Mechanical Properties of Ti-Based Bulk Metallic Glasses
Li Lixin;Liu Riping;Zhao Junliang;Cai Hongxin;Yang Zhongjuan;Henan Polytechnic University;State Key Laboratory of Metastable Materials Science & Technology;Yanshan University;

..............page:1835-1838

Effect of Hot Isostatic Pressing Parameters on the Microstructures and Grain Growth Behavior of the Matrix of SiC_f/Ti-6Al-4V Composites
Feng Guanghai;Yang Yanqing;Zhao Guangming;Zhang Wei;Luo Xian;Huang Bin;State Key Laboratory of Solidification Processing;Northwestern Polytechnical University;

..............page:1839-1845

Influence of Rare Earth on the Wetting Ability of AgSnO₂ Contact Material
Wang Haitao;Wang Jingqin;Du Jiang;Meng Fanqing;Province-Ministry Joint Key Laboratory of Electromagnetic Field and Electrical Apparatus Reliability;Hebei University of Technology;DODUCO Electrical Contacts Manufacturing Company;

..............page:1846-1849

Effect of Compressing Deformation on the Crystal Structure of Stress-Induced Martensitic in Ti-10V-2Fe-3Al Titanium Alloy
Bai Xinfang;Zhao Yongqing;Zeng Weidong;Liu Jingyan;Northwestern Polytechnical University;Northwest Institute for Nonferrous Metal Research;

..............page:1850-1854

Isothermal Beta Grain Growth Kinetics of TC4-DT Titanium Alloy under Two Different Prior Processing Conditions: Deformed vs. Undeformed
Peng Xiaona;Guo Hongzhen;Qin Chun;Shi Zhifeng;Zhao Zhanglong;Northwestern Polytechnical University;

..............page:1855-1861

Microstructure and Mechanical Properties of Mg-8Al-Sr-xCa(x=0.5, 1.0, 1.5) Alloys
Zhang Daidong;Zhang Xiaoru;Hao Xiaowei;Jin Yaxu;Wang Yu;Chai Yuesheng;Fang Daqing;Taiyuan University of Science and Technology;

..............page:1862-1866

First-Principles Calculation of Electronic Structure and Optical Properties of Nd-doped Rutile TiO₂
Wang Song;Xie Ying;Yu Zhongchen;Zhang Xuejiao;Ma Dong;Cao Fuda;Northeast Petroleum University;Heilongjiang University;

..............page:1867-1870

High-Temperature Oxidation Resistance of W, B, Y Microalloyed TiAl Based Alloys with High Nb Content
Wang Yanjing;Liu Le;Song Meijin;Wang Jijie;Du Xinghao;Shenyang Aerospace University;

..............page:1871-1875

Hydrogen Absorption Behavior of Zr-Nb Alloy and Phase Transformations
Wang Jianwei;Wang Lijun;Yan Shufang;State Key Laboratory of Nonferrous Metals & Processes;General Research Institute for Nonferrous Metals;Division of Rare Metal Materials and Metallurgy;General Research Institute for Nonferrous Metals;Inner Mongolia University of Technology;

..............page:1876-1880

Phase Transitions of the Al-B System
Xiong Xiaomei;Yang Fang;Wang Lijun;Yan Guo;Wang Qingyang;Liu Guoqing;Feng Jianqing;Li Chengshan;Liu Xianghong;Feng Yong;Northwest Institute for Nonferrous Metal Research;Northeastern University;Western Superconducting Technologies Co.;Ltd;

..............page:1881-1885

Microstructure and Tribological Behavior of BCN Thin Films with Different Nitrogen Contents
Chen Xiangyang;Zhang Jin;Ma Shengli;Hu Haixia;Anhui University of Science and Technology;Xi’an Jiaotong University;

..............page:1886-1889

Influences of Electronic Field on the Degradation of Methylene Blue under the Photocatalysis of TiO₂
Yu Jiemei;Liu Zongming;Huang Taizhong;Han Jitian;Chong Daohuang;Shandong University;University of Jinan;

..............page:1890-1896

Influences of Strain Rate on the Plastic Deformation Mechanism of Zirconium Alloy
Zou Dongli;Luan Baifeng;Xiao Dongping;Chongqing University;

..............page:1897-1901

Constitutive Modeling of Near Beta Titanium Alloy Ti555211 Based on the Internal-State-Variable Method during Hot Deformation Process
An Zhen;Feng Yong;Li Jinshan;Liu Xianghong;Du Yuxuan;Lou Meiqi;Liu Guangfa;Han Fengbo;State Key Laboratory of Solidification Processing;Northwestern Polytechnical University;Western Superconducting Technologies Co.;Ltd;

..............page:1902-1907

Effect of Alloying Elements on Mechanical Properties of the SiC/Al Biconnected Composites
Xue Liaoyu;Wang Fuchi;Wang Yangwei;Ma Zhuang;Wang Hao;National Key Laboratory of Science and Technology on Materials under Shock and Impact;Beijing Institute of Technology;

..............page:1908-1912

High Temperature Solid Phase Synthesis and Photoluminescent Properties of CaBPO₅:Dy³⁺ Phosphor
Jiang Jiqiong;Wu Yanjiao;Zou Zhengguang;Wu Yi;Long Fei;Shen Tianyu;Guilin University of Technology;Guangxi University;

..............page:1913-1916

Electrochemical Properties of Pb-0.3%Ag/Pb-CeO₂ Composite Anodes
He Shiwei;Xu Ruidong;Chen Hansen;Huang Liping;Kong Ying;Chen Buming;State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization;Kunming University of Science and Technology;Key Laboratory of Inorganic Coating Materials;Chinese Academy of Sciences;

..............page:1917-1923

Precipitation Behavior and Tensile Properties of Stress-Aged Ti-2.5Cu Alloy
Zhang Lincai;Zhang Man;Guo Xiaodong;Sun Qiaoyan;Xiao Lin;Sun Jun;Liu Li;Song Zhenya;Jiangsu Provincial Key Laboratory for Interventional Medical Devices;State Key Laboratory for Mechanical Behavior of Materials;Xi’an Jiaotong University;Shaoxing University;

..............page:1924-1927

Effect of Combined Addition of Grain Growth Inhibitors on the Cemented Carbides Prepared by WC-Co Composite Powder
Fu Jun;Song Xiaoyan;Wei Chongbin;Liu Xuemei;Wang Haibin;Gao Yang;Wang Yao;Key Laboratory of Advanced Functional Materials;Ministry of Education;Beijing University of Technology;

..............page:1928-1934

Dehydrogenation Behavior and Mechanism of LiBH₄ Doped with Ce₂Mg₁₇ and Its Hydride
Han Leyuan;Xiao Xuezhang;Wang Shunkui;Fan Xiulin;Li Shouquan;Ge Hongwei;Chen Lixin;Zhejiang University;

..............page:1935-1938

Nucleation of Nb⁵⁺ Doped MOD-YBCO Films by 2D-XRD Technique
Mao Lei;Suo Hongli;Liu Min;Zhang Zili;Ye Shuai;Ma Lin;Key Laboratory of Advanced Functional Materials;Ministry of Education;Beijing University of Technology;

..............page:1939-1943

Fatigue Crack Propagation Behavior of 2050 Aluminum Alloy
Zhong Jing;Jia Min;Fan Chunping;Zheng Ziqiao;Li Hongping;Wu Qiuping;Central South University;Shanghai Aircraft Design and Research Institute;

..............page:1944-1950

Fabrication and Magnetic Properties of FINEMET Alloy Powder Cores
Xiong Yadong;Lin Kun;Yan Mi;Jiang Yinzhu;Zhejiang University;

..............page:1951-1954

Growth Mode of VO₂ Film on SiO₂ Substrate and Its Phase Transition Property
Yue Fang;Huang Wanxia;Shi Qiwu;Deng Xianjin;Wang Cheng;Zhang Jingyu;Li Danxia;Sichuan University;China Academy of Engineering Physics;

..............page:1955-1958

Effects of La₂O₃ on Solid-State Boronizing of TC4 Titanium Alloy
Tao Jun;Xu Xiaojing;Ge Xiaolan;Liu Yunhui;Song Zhenhua;He Xinghua;Wu Guilan;Engineering Institute of Advanced Manufacturing and Modern Equipment Technology;Jiangsu University;

..............page:1959-1963

Effects of Minor In Addition on Oxidation Mechanism of Ag-Sn Alloy Powders
Li Bo;Liu Xinyu;Huang Xiwen;Ye Fan;Zhang Xiaowen;Zhang Qi;Chen Guangming;Guilin University of Electronic Technology;Guilin Electrical Equipment Scientific Research Institute Co.;Ltd;

..............page:1964-1968

Microstructure and Mechanical Property of 6061 Alloy Near-Liquidus Electromagnetic Semi-Continuous Casting and Thixoforging
Wang Ping;Liu Jing;Key Laboratory of Ministry of Education for Electromagnetic Processing of Materials;Northeastern University;

..............page:1969-1973

Semi-Solid Aluminum Alloy Slurry Prepared by Intermediate Frequency Electromagnetic Oscillation
Zhang Qi;Cao Miao;Cai Jin;Zhao Shengdun;Xi’an Jiaotong University;

..............page:1974-1978

Fabrication of Doped SnO₂ Powder Used for Cu Matrix Electrical Contact
Wang Qingzhou;Lu Dongmei;Cui Chunxiang;Xu Meng;Hebei University of Technology;

..............page:1979-1982

Effects of Rare Earth Magnesium on Eutectic Carbide Granulation in High Speed Steel W6Mo5Cr4V2
Zhu Shili;Cao Huazhen;Hu Wenhao;Jin Yaohui;Zheng Guoqu;Zhejiang University of Technology;Hangzhou Iron & Steel Group Co.;

..............page:1983-1986

Preparation of Tungsten Boride Powder by High-Temperature Solid-State Reaction
Cao Xiaozhou;Xue Xiangxin;Yang He;Li Haitao;Wang Huiying;Shi Lihan;Northeastern University;Shenyang Aircraft Design and Research Institute;

..............page:1987-1990

Measurement of the Residual Stress Induced by Milling in TC4 Workpiece before Self-Balancing and Its FEA
Meng Longhui;He Ning;Li Liang;Yang Yinfei;Zhao Wei;Nanjing University of Aeronautics and Astronautics;

..............page:1991-1996

Numerical Simulation of Explosive Compaction of W-Cu Powder and Experiment Validation
Wang Zhanlei;Wang Huiping;Wang Lingqu;Hou Zhonghua;Henan University of Science and Technology;Gongyi Administration of Quality and Technology Supervision;

..............page:1997-2001

Failure Behavior of SnAgCu/Cu Solder Joint Subjected to Thermal Cycling
Xiao Hui;Li Xiaoyan;Chen Jian;Lei Yongping;Shi Yaowu;Beijing University of Technology;

..............page:2002-2006

Effect of Insertion of a Thin Zr Interlayer on Thermal Stability of ZrN Barrier in Cu Metallization
Zhai Yannan;Yang Kun;Zhang Hui;Tang Yankun;Zhang Lili;Aviation University of Air Army;Changchun Faway-Johnson Controls CO.;Ltd;

..............page:2007-2010

Microstructure and the High Temperature Friction and Wear Behavior of Cr₃C₂-NiCr Coating on CuCo₂Be Alloy by Plasma Spraying
Li Hui;Cheng Xiaonong;Xie Chunsheng;Lu Pengcheng;Jiangsu University;Jiangsu University of Science and Technology;

..............page:2011-2016

Influence of Roll Gap Geometry on Through-Thickness Uniformity of Texture and Microstructure in Clock-Rolled Tantalum
Deng Chao;Liu Shifeng;Ji Jingli;Hao Xiaobo;Liang Yanxiang;Chongqing University;

..............page:2017-2022

Tensile Properties of Stainless Steel Fiber Porous Materials
Liu Huaili;Wang Jianzhong;Tang Huiping;Northeastern University;State Key Laboratory of Porous Metal Materials;Northwest Institute for Nonferrous Metal Research;

..............page:2023-2026

Effect of Initial Grain Size and Intermediate Recovery Annealing on the Formation of Cube Texture in Ni-9.3at%W Substrate
Wang Jinhua;Suo Hongli;Ma Lin;Tian Hui;Meng Yichen;Li Mengxiao;Wang Yi;Liu Min;Wang Gaosheng;Key Laboratory of Advanced Functional Materials;Ministry of Education;Beijing University of Technology;

..............page:2027-2031

Effects of Two-Step Aging Treatment on Microstructure and Mechanical Properties of Spray-Deposited Al-Zn-Mg-Cu Alloy
Shen Yuanguo;Bai Pucun;Hou Xiaohu;Cui Xiaoming;Inner Mongolia University of Technology;

..............page:2032-2037

Annealing Process of Cu-Mg-Te-Y Alloy
Han Jianning;Chen Liang;Zhou Bingwen;Xue Yanyan;Jia Fei;Zhang Xingguo;Dalian University of Technology;

..............page:2038-2042

Advances in Synthesis of Lithium Iron Phosphate Cathode Material by a Chemical Precipitation Method
Jiang Bo;Yang Gai;Cai Feipeng;Wang Bo;Hu Suqin;Wang Jianmei;Cui Wenjia;Key Laboratory for Biomass Gasification Technology of Shandong Province;Energy Research Institute of Shangdong Academy of Science;

..............page:2043-2048