Rare Metal Materials and Engineering 2016 Issue 5 Microwave-Assisted Synthesis of NiO/C and Its Capacitance Property

Microwave-Assisted Synthesis of NiO/C and Its Capacitance Property
Zhang Chuanxiang;Dai Yuming;He Xiancong;Ba Zhixin;Zhou Hengzhi;Nanjing Institute of Technology;Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology;

..............page:1093-1099

Bonding Process and Application Properties of an Al-Ni Layer Composite Sheet for Lithium-ion Battery Packaging
Yu Kun;Xiong Hanqing;Dai Yilong;Teng Fei;Fan Sufeng;Qiao Xueyan;Wen Li;Central South University;Yantai Nanshan University;

..............page:1100-1105

Ostwald Ripening Behavior of Al₈CeCu₄ Phase in Al-14Cu-7Ce Alloy
Li Hai;Xu Wei;Wang Zhixiu;Fang Bijun;Song Renguo;Zheng Ziqiao;Changzhou University;Jiangsu Key Laboratory of Materials Surface Science and Technology;Central South University;

..............page:1106-1110

Effect of Extrusion Temperatures on Microstructures and Mechanical Properties of Mg-6Zn-1Mn-4Sn-0.5Y Alloy
Hu Guangshan;Zhang Dingfei;Tang Tian;Jiang Luyao;Pan Fusheng;Chongqing University;National Engineering Research Center for Magnesium Alloys;

..............page:1111-1116

High Visible-light Photocatalytic Activity of γ-Fe₂O₃/TiO₂ Nanotube Heterojunction Arrays
Zhou Guanghong;Ding Hongyan;Zhu Yufu;Lin Yuebin;Liu Peng;Jiangsu Provincial Key Laboratory of Interventional Medical Devices;Huaiyin Institute of Technology;School of Physical and Mathematical Sciences;Nanyang Technological University;Jiangsu Provincial Key Laboratory of Interventional Medical Devices;Huaiyin Institute of Technology;School of Physical and Mathematical Sciences;Nanyang Technological University;

..............page:1117-1121

Friction and Wear Performances of 7475 Aluminium Alloy after Anodic Oxidation
Kong Dejun;Wang Jinchun;Liu Hao;Jiangsu Key Laboratory of Materials Surface Science and Technology;Changzhou University;

..............page:1122-1127

One-Step Synthesis of TiO₂-Hydroxyapatite Nano-films on NiTi Alloy by Hydrothermal Method
Fu Tao;Li Hongwei;Wu Feng;Li Wen;Sun Jianmin;Key Laboratory of Biomedical Information Engineering of Ministry of Education;School of Life Science and Technology;Xi’an Jiaotong University;School of Materials Science and Engineering;Chang’an University;School of Medicine;Xi’an Jiaotong University;

..............page:1128-1131

A New Method of Critical Failure Monitoring for the Heterogeneity Material Friction Welding Specimens Applying Multiple Physical Signals
Zhang Yubo;Xu Binshi;Wang Haidou;He Pengfei;Xing Zhiguo;National Key Laboratory for Remanufacturing;Academy of Armored Forces Engineering;

..............page:1132-1137

Microstructure and Mechanical Properties of TC18 Titanium Alloy
Sun Shuyu;Lv Weijie;Taizhou University;State Key Laboratory of Metal Matrix Composites;Shanghai Jiaotong University;

..............page:1138-1141

Electrical Transportation Behavior of Magnetron Sputtered Al-Fe-Sn Thin Film
Zhao Guannan;Zheng Zeng;Geng Kaijie;Zhang Qing;Zhang Yong;Yan Biao;Tongji University;

..............page:1142-1146

Directional Migration Behavior of Alloying Elements in the Rafting Process of the Single Crystal Superalloy DD6
Zhang Shiming;Yu Jingui;Huang Zeyin;Huang Rong;Liu Shengfa;Zhang Qiaoxin;Yue Zhufeng;Li Xuewu;Wuhan University of Technology;Northwestern Polytechnical University;

..............page:1147-1151

Interface Microstructure and Formation Mechanism of Diamond Abrasives Laser Brazed with Ni-Cr Solder
Yang Zhibo;Liu Aiju;Yang Ruiyun;Zhang Zhen;Liu Shian;Henan Polytechnic University;

..............page:1152-1156

Effect of Ball Milling Process on the in Situ Synthesis of Nano-TiB Whiskers
Liu Liping;Liu Yongbing;Ji Lianfeng;Cao Zhanyi;Yang Xiaohong;Key Laboratory of Automobile Materials;Ministry of Education;Jilin University;Changchun Vocational Institute of Technology;

..............page:1157-1161

Microstructural Evolution and Properties of Aged Cu-3Ti-3Ni Alloy
Liu Jia;Wang Xianhui;Guo Tingting;Zou Juntao;Yang Xiaohong;Xi’an University of Technology;Deakin University;

..............page:1162-1167

Influence of Asymmetric Hot Rolling on Microstructure and Mechanical Property of Ti-6Al-4V Alloy Sheet
Li Jianping;Liu Zhenguang;Li Jing;The State Key Laboratory of Rolling and Automation;Northeastern University;

..............page:1168-1174

Mathematical Model of Coupled Thermal-Stress about AZ31B Magnesium Alloy Plate during Hot Rolling
Jia Weitao;Ma Lifeng;Liu Pengtao;Xu Haijie;Jiang Yaping;Shanxi Provincial Key Laboratory of Metallurgical Equipment Design and Technology;Taiyuan University of Science and Technology;Key Laboratory of Electromagnetic Processing of Materials;Ministry of Education;Northeastern University;

..............page:1175-1181

Research on Mg₃N₂ Clusters Adsorbing H by Density Functional Theory
Chen Yuhong;Li Wenqiang;Zhang Meiling;Zhang Cairong;Kang Long;Luo Yongchun;Lanzhou University of Technology;State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals;

..............page:1182-1188

Residual Stress and Fatigue Properties of the Cold Hole Expansion Process in Titanium Alloy TC21 Plates
Ge Ende;Fu Yucan;Su Honghua;Xu Jiuhua;Chen Xuemei;Nanjing University of Aeronautics and Astronautics;Chengdu Aircraft Industrial Corporation;

..............page:1189-1195

Mechanical Anisotropy and Inhomogeneity through Thickness of 2297-T87 Aluminum Alloy Thick Plate
Wang Haijin;Zheng Ziqiao;Fan Xuesong;Central South University;

..............page:1196-1202

Life Prediction Models in very High Cycle Fatigue Regime
Song Yanan;Xu Binshi;Wang Haidou;Zhang Yubo;Xing Zhiguo;Academy of Armored Forces Engineering;

..............page:1203-1208

Phase Composition and Properties of (Ti,Al)N Coatings Deposited by Multi-arc Ion Plating Assisted with Hollow Cathode
Wu Hua;You Shenshen;Jiang Ying;Key Laboratory of Advanced Structural Materials of Ministry of Education;Changchun University of Technology;

..............page:1209-1214

Microstructure of Laser Solid Forming K465 Superalloy
Li Qiuge;Lin Xin;Wang Xinghua;Liu Fenggang;Yang Haiou;Huang Weidong;State Key Laboratory of Solidification Processing;Northwestern Polytechnical University;

..............page:1215-1219

Influence of Aging Temperature on Antisite Defects in Al-9.0at%Li Alloy
Zhang Jianjun;Zhang Dongbo;Xue Zhiyong;Zhang Jing;Chen Zheng;North China Electric Power University;Northwestern Polytechnical University;

..............page:1220-1224

Recrystallization Characterization of FGH96 Superalloy
Ning Yongquan;Li Hui;Yao Zekun;Guo Hongzhen;Northwestern Polytechnical University;The First Aircraft Institute;Aviation Industry Corporation of China;

..............page:1225-1229

Influence of Laser Peening and Shot Peening on Fatigue Properties of FGH97 Superalloy
Gao Yukui;Zhong Zheng;Lei Liming;Tongji University;AVIC Commercial Aircraft Engine Co.Ltd;

..............page:1230-1234

Deformation and Fracture of Ni-Ti Shape Memory Alloys under the Penetration of Projectiles
Zhang Xiao;Yang Suyuan;National Key Laboratory of Science and Technology on Materials under Shock and Impact;Beijing Institute of Technology;

..............page:1235-1239

Isothermal Section of Zr-Cr-Cu Ternary System at 700 ℃
Zhang Min;Ouyang Yifang;Yuan Gaihuan;Tang Yiyuan;Zhu Jinming;Shen Jianyun;Liang Jianlie;Guangxi University of Nationality;Guangxi University;State Nuclear Bao Ti Zirconium Industry Company;

..............page:1240-1244

Microstructure and Damping of Mg97Zn1Y2 Alloy with or without Solid Solution Treatment
Wan Diqing;Li Zhumin;Zhou Xinjian;East China Jiaotong University;

..............page:1245-1248

Dielectric,Piezoelectric and Aging Properties of Multiferroic Ceramics BiFeO₃-PbTiO₃-BaTiO₃
Ning Haixia;Hou Xianbo;Yu Jian;Tongji University;Suzhou Vocational University;

..............page:1249-1252

Distribution and Roles of P in DD6 Alloy
Yang Jinxia;Li Jinguo;Jin Tao;Sun Xiaofeng;Hu Zhuangqi;Institute of Metal Research;Chinese Academy of Sciences;

..............page:1253-1256

Influence of Pulse Parameters on the Morphology and Microstructure of Gold Electrodeposits
Lei Ting;Yuan Xinqiang;Wang Chengbo;Zheng Lishan;China University of Geosciences;

..............page:1257-1263

Influence of Directionally Solidified Process on Porosity in the Cross-Section Transitions of Ni-Based Superalloy DZ417G
Wang Yongfeng;Meng Xiangbin;Li Jinguo;Liu Xinggang;Wang Fan;Jin Tao;Sun Xiaofeng;Institute of Metal Research;Chinese Academy of Sciences;Northeastern University;Guizhou Liyang Aero-Power Co.Ltd;

..............page:1264-1270

Effect of Surfactant on Coelectrodeposition Behavior of Ti-Coated Diamond-Ni Composite
Zhang Li;Wang Richu;Zhang Chun;Wang Naiguang;Central South University;

..............page:1271-1277

Aluminothermic Reduction of Lunar Soil Simulant Ilmenite in Cryolite Molten Salt Media
Shi Zhongning;Xie Kaiyu;Guan Pingping;Liu Aimin;Hu Xianwei;Gao Bingliang;Wang Zhaowen;Northeastern University;

..............page:1278-1283

Using New Baffle to Control Defects in a Vacuum Investment-Cast Ni-Based Turbine Blade
Qin Ling;Shen Jun;Yang Gongxian;Li Qiudong;Fu Hengzhi;State Key Laboratory of Solidification Processing;Northwestern Polytechnical University;Dongfang Turbine Co.Ltd;

..............page:1284-1289

Effect of Intermediate Layer on Microstructure and Mechanical Properties of Ti/Al Joint Welded by Friction Stir Welding
Zhang Xin;Chen Yuhua;Wang Shanlin;National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology;Nanchang Hangkong University;

..............page:1290-1295

Effect of Homogenizing Annealing Treatment on Hot-Rolled Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
Zheng Liuwei;Liang Wei;Zhao Zilong;Li Ya’e;Wang Hongxia;Wang Yide;Taiyuan University of Technology;Key Laboratory of Advanced Magnesium Based Materials of Shanxi Province;Shanxi Engineering Vocational College;Taiyuan Iron and Steel Co.;LTD;

..............page:1296-1301

Microstructure and Properties of Welded Joints of Low Density Niobium Alloy
Bai Run;Zheng Xin;Cai Xiaomei;Wang Feng;Xia Mingxing;Liu Hui;Li Laiping;Northwest Institute for Nonferrous Metal Research;

..............page:1302-1307

An Experimental Study on Perforation Behavior of Pole Penetrator Prepared from W_F/Zr-Based Bulk Metallic Glass Matrix Composite
Du Zhonghua;Du Chengxin;Zhu Zhengwang;Xia Longxiang;Nanjing University of Science and Technology;Institute of Metal Research;Chinese Academy of Sciences;

..............page:1308-1313

Electroplating Aluminum on CLAM Steel by Chloroaluminate Ionic Liquids at Ambient Temperature
Wang Wenxuan;Lu Guangda;Zhang Guikai;Yang Feilong;Lai Xinchun;China Academy of Engineering Physics;

..............page:1314-1319

Microstructure and Mechanical Properties of Ti-Al-Zr-Cr-N Bilayer Films Deposited by Multi-arc Ion Plating
Zhao Shilu;Zhang Zhen;Zhang Jun;Wang Shuanghong;Zhang Zhenggui;Shenyang University;BMW Brilliance Automotive Ltd;

..............page:1320-1324

Preparation of Dense Spherical Molybdenum Powder with High Purity via Induction Plasma
Liu Xiaoping;Wang Kuaishe;Hu Ping;Chen Qiang;Xi’an University of Architecture & Technology;Jinduicheng Molybdenum CO.Ltd;

..............page:1325-1329

Genetic Characteristics of Morphology and Particle Size Distribution of WC-Co Composite Powder
Guo Shengda;Yang Jiangao;Zhu Ertao;Chen Hao;Lv Jian;Jiangxi University of Science and Technology;Engineering Research Center of Tungsten Resources High-efficiency Development and Application Technology of the Ministry of Education;Advanced Corporation for Materials & Equipment;

..............page:1330-1334

Removal of Inclusions from Aluminum Melt Using Alternating Combined Magnetic Field
Gao Minrui;Li Qiulin;Yang Dingguo;Liu Wei;Graduate School at Shenzhen;Tsinghua University;Tsinghua University;

..............page:1335-1339

Annealing Behaviors of Cu-Zn-Si Alloy with Nanotwins Prepared by Cryorolling
Qin Jia;Yang Xuyue;Ye Youxiong;Zhang Xiangkai;Centre South University;Key Laboratory of Nonferrous Metal Materials Science and Engineering;Ministry of Education;

..............page:1340-1344

Effect of Precursors on Preparation of Ultrafine Nickel Powder by Supercritical Methanol
Li Shuangming;Niu Mingju;Ge Xin;Shen Dianxu;Wang Huan;Li Wenxiu;Yu Sansan;Shenyang University of Chemical Technology;Key Laboratory of Chemical Separation Technology of Liaoning Province;

..............page:1345-1348

Mechanism of Corrosion Resistance for Cu-30Ni-XRE(X=0～0.213) Alloy
Mao Xiangyang;Tan Rongsheng;Zhao Xiuming;Wang Zhangzhong;Chen Ming;Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology;Nanjing Institute of Technology;Southeast University;Fushun Special Steel Co.Ltd;

..............page:1349-1352

Preparation Process of High-Purity Ruthenium Used for Sputtering Target
Zhang Deyu;Liu Weisheng;Tianshui Normal University;Lanzhou University;

..............page:1353-1356

Research Progress and Prospect of High Nb Containing TiAl Alloys Directional Solidification
Yang Jieren;Chen Ruirun;Guo Jingjie;Ding Hongsheng;Fu Hengzhi;State Key Laboratory of Solidification Process;Northwestern Polytechnical University;Harbin Institute of Technology;

..............page:1357-1363

Research Progress of Medical TiNi Alloy Surface Modification Technology
Wang Zhenxia;Zhao Yuantao;Shan Xiaolin;Yu Shengwang;Liu Xiaoping;He Zhiyong;Taiyuan University of Technology;

..............page:1364-1368